HDMI Splitter Vs HDMI Switch | In Fact, They Serve Opposing Purposes: Many people confuse “switch” and “splitter,” yet the two devices serve very different functions. If you want the short version, an HDMI switch takes many sources and enables you to choose (switch) between them, delivering one cable to your TV.
We’ll go into more detail about HDMI switches later. As you may have guessed, a splitter takes a single signal and distributes it over a number of HDMI cables.
HDMI Splitter Vs HDMI Switch | In Fact, They Serve Opposing Purposes
HDMI Splitter Differs From An HDMI Switch
HDMI switch allows you to connect various devices (such as a TV, Xbox, Roku, or cable box) with a single cable.
An HDMI splitter distributes a signal to many displays from a single source.
Most of one who are reading this will most likely be in the market for a new computer. While a splitter may be necessary for various circumstances, the average consumer is unlikely to encounter one.
HDMI switches Is Good Aren’t Enough Inputs On a Single Device
If your TV, AV receiver, or sound bar has too few inputs for the number of sources you have, you’ll want to invest in an HDMI switch.
You have a cable box, a Roku, and an Xbox. Therefore your TV has two HDMI inputs. To play, on the other, many of you will have to switch HDMI cables between your consoles.
As I’m sure many of you have both an Xbox and a PS3. There’s no doubt that a switch would be beneficial. For the most part, they are affordable.
Single HDMI Source Powers Many TVs Through HDMI Splitter
An HDMI splitter is required if you have a single source and relay the source’s signal to several TVs. It’s possible that the TV is in a different room, or that you have a TV and a projector in the same room.
Using a splitter, you can make numerous copies of the same signal and deliver them via different HDMI cables. With multiple “input” and multiple “outs,” splitters can double as switches. These are the topics we’ll cover next.
Keep in mind that the lowest resolution display’s maximum resolution applies to both screens when using two simultaneously.
The 4K source will only send 1080p if it is connected to a 1080p display and a 1080p TV. If you want to watch 1080p on that TV, you will have to use a splitter that converts the signal to 1080p.
According to theory, you shouldn’t have any problems with copy protection. It’s possible to distribute any content to numerous TVs by using a splitter. That doesn’t mean you won’t run into problems, however.